Archival equipment

From DM Live - the Depeche Mode live encyclopedia for the masses
Jump to navigationJump to search

The webmaster has the following equipment at his disposal to digitize or transfer several different formats.

Magnetic media

Audio cassette tapes

Nakamichi Cassette Deck 1

  • Three head, asymmetrical dual capstan transport with pressure pad lifter
  • Manual playback azimuth adjustment, allowing best frequency response of a tape that was recorded on any other device
  • Serviced:
    • Tape speed, default head azimuth, head height, playback level and frequency response, etc. calibrated against A.N.T. Audio's stellar alignment tapes
      • Performance checked against calibration tapes about every six months; I will post a wow & flutter figure shortly to prove proper performance
    • Factory belt kit from Marrs Communications ensures wow & flutter figures meet or exceed factory specifications
    • Tape path thoroughly cleaned and demagnetized regularly according to owner's manual recommendations, approximately 10 hours of use between cleanings and 50 hours between demagnetization using a wand-type demagnetizer
    • Tape transport cleaned and re-lubricated as of June 2015 (includes capstan flywheels and thrust bearings, reel hubs, and reel motor front bearing; new replacement capstan motor [mentioned earlier] does not need re-lubrication for several years from installation date)
  • Output stage:
    • Mediabridge 6 foot RCA to 3.5mm cable -> ASUS Xonar DX sound card with 112dB input signal-to-noise ratio (32-bit depth and 96khz sample rate) -> Adobe Audition CC 2015 (recording at 32/96)
    • Each tape is fully wound (fast forwarded) and then rewound to ensure tape spools are packed with the least amount of potential stiction that may result from a long time spent in storage
    • Azimuth is optimized per tape, and if required, per each individual tape's side

Digital Audio Tape (DAT)

Sony SDT-9000 SCSI DAT drive

  • Flashed with firmware that is able to read audio DATs
  • Most direct option to rip audio DATs to WAV format in their native sample rate (i.e. 16-bit 32khz / 44.1khz / 48khz)
  • Allows error correction which no standalone DAT deck / recorder can perform
  • Regularly cleaned according to manufacturer recommendations using "new old stock" Seagate DAT head cleaning tapes
  • DATs ripped using dat2wav software

VHS / S-VHS

NTSC & PAL

  • Philips VR1000 (JVC rebadge) with built-in line time base corrector or JVC HR-S7600U with built-in line time base corrector
  • DataVideo TBC-1000 full-frame time base corrector
  • ATI All-In-Wonder 9600XT AGP video card for lossless Huffyuv AVI captures captured on a dedicated Windows XP Service Pack 2 computer
    • Other general computer specifications: HP Compaq d530 CMT computer with Pentium 4 Extreme Edition 3.2ghz with HyperThreading, 1.5GB DDR-400 RAM, 80GB Western Digital Velociraptor + 500GB Western Digital Blue hard drives, Creative Sound Blaster X-Fi XtremeMusic, Microsoft Windows XP Service Pack 2
  • Audio captured using high quality Monster RCA cables passed through capture card to Creative Sound Blaster X-Fi XtremeMusic sound card

Optical Media

Compact Discs / CD-R

DVD

  • ImgBurn to make ISOs
  • PgcDemux to demux audio soundtracks to their native formats

BD

  • Not applicable at this time due to no Blu-Ray bootlegs existing that need to be ripped; as far as I know, only one or two BD recordings have been torrented on DIME.

MiniDisc

Sony MDS-S707 MiniDisc deck

  • Optical output is used for digitally bit-perfect captures
  • Many thanks to Ryan Jonik for his generous contribution

Vinyl / LP

Audio-Technica AT-LP120-USB Direct-Drive Professional Turntable + Shure M97xE Cartridge